ब्रँड: HENCSTAR
Aspect Ratio: 16:10
Server: OEM/ODM
Response Time: TR6ms TF6ms
Pixel Pitch: 0.2505(H)mm X 0.2505(V)mm
Resolution: 1920 X 1080(WQXGA)
View Angle: L / R: 89/89 , U / D:89/89
Luminance: 280 Nits
Contrast Ratio: 1000(MIN.)
Colors: 8Bits-true 16.7M Colors
पॅकेजिंग: packed in Standard Carton as per required
उत्पादकता: 10000
वाहतूक: Ocean,Air
मूळ ठिकाण: Guangdong, China (Mainland)
पुरवठा क्षमता: 5000
प्रमाणपत्र: ROHS, FCC, CE
बंदर: Shenzhen
पैसे भरण्याची पध्दत: T/T,Paypal
इन्कोटर्म: FOB,CIF,EXW
This industrial touch display is capable of providing a tactile touch interface system that relies on actuators to produce a tactile sensation. The development of actuators and control technology enables actuators to support a variety of touch feedback from small to large touch panels and touch screens. The product range covers products from mobile phones to widescreen touch monitors. In addition, the processor load required to support haptic systems is relatively small, touch input technology is actually very popular, and electromechanical solutions are also readily available. The usual interpretation of haptic technology for touch-activated control is that the full motion of a button or switch must be fully replicated to be most effective. But in fact, the perceptual sensitivity of human fingers is not so low. Numerous studies have found that neurons in human fingers can detect very small movements if combined with appropriate acceleration. Under acceleration conditions above 1.5g, only 0.1mm of motion can be perceived by humans as a confirmation response. However, the minimum acceleration of 1.5g is not enough to produce the best tactile effect. A more effective haptic effect can be produced by generating an acceleration and a displacement with a stronger stimulus. These accelerations and displacements can be seen in the "phase portraits" shown in this article. Phase diagrams can be generated after successful integration of haptic technology into haptic interface devices through electromechanical methods.
industrial touch monitor
LCD screen
Covered with 3 mm explosion-proof glass
Enhanced LED backlight, readable in sunlight
Full HD 1920 * 1080 resolution
industrial display monitors
industrial display monitors
●Solid structure, rugged 15mm Aluminum Frame Rugged rack-mounted for industrial purpose.
●Easily mounted the touch screen(optional), tempered glass display surface box, avoid dust, waterproof, avoid vibration.
●Suitable for large electromagnetic interference and low power consumption of industrial one-site human machine interface, process control and other occasions.
●VGA input, the cable longest up to 5M.
●Can use air interface, hard steel materials, the panels look elegant and generous.
●Low-E characteristics of LCD screen is not flashing, compared to the traditional CRT, can reduce the dim age to your eyes.
Product Specification
Panel specification
Size
32”
Aspect Ratio
16:10
Pixel Pitch
0.2505(H)mm x 0.2505(V)mm
Resolution
1920 x 1080(WQXGA)
View angle
L / R: 89/89 , U / D:89/89
Luminance
280 nits
Contrast ratio
1000(MIN.)
Response time
TR6ms TF6ms
Colors
8Bits-true 16.7M colors
Video format
Support PAL/NTSC/ASCEM etc.
Port
VGA,CVBS
Horizontal Frequency
67.5KHZ
Vertical Frequency
60HZ
Display System
Main Chip (STDP9320 )
10ns
48% to 52%
2.5W low TDP
Memory
256MB
Signal I/O
1 *HDMI，1*DVI-I , 1 *VGA，1*USB
Audio
1* Audio Output(Optional)
Power requirement
+24V +12V,+5V,+5V VSB, PS-ON
Rear Panel I/O
1*VGA Waterproof Connector
2*DVI-I Waterproof Connector
1*HDMI NA HDMI-W Connector-19Pin
1*AC D38999 Connector-5Pin
1*VGA Waterproof Connector
2*DVI-I Waterproof Connector
1*HDMI NA HDMI-W Connector-19Pin
1*USB NA USB-W Connector-4Pin
1*AC D38999 Connector-5Pin
Video SYSTEM
System Supported
PAL/SECAM/NTSC
Signal system
B/G,D/K,I,L/L,M/N
Stereo
SRS TruSurround XT
Power: 10W*2 (Optional)
QUALITY APPROVAL
Fire-resistance
UL-94HB
Water-resistance
NeMa4
Chemical-resistance
Active area of Touch is resistant for acetone(Optional), toluene, butanone, acetylacetone, methanol, acetic acid, gas, coal oil, and Vinegar.
Certificate
RoHS 、FCC（Part 15）、CE（EN55022 and EN55024）Optional
Support MIL-STD-810G ( check below for Detail)
1*USB NA USB-W Connector-4Pin
Mechanical Drawing
industrial display monitors Application
industrial grade touch screen monitor
उत्पादन श्रेणी : औद्योगिक मॉनिटर्स > औद्योगिक स्पर्श मॉनिटर
गोपनीयता विधान: आपली गोपनीयता आमच्यासाठी खूप महत्वाची आहे. आमची कंपनी आपली वैयक्तिक माहिती आपल्या स्पष्ट परवानग्यांसह कोणत्याही एक्सपॅनीला उघड करू नये असे वचन देते.
अधिक माहिती भरा जेणेकरून आपल्याशी वेगवान संपर्क साधू शकेल
गोपनीयता विधान: आपली गोपनीयता आमच्यासाठी खूप महत्वाची आहे. आमची कंपनी आपली वैयक्तिक माहिती आपल्या स्पष्ट परवानग्यांसह कोणत्याही एक्सपॅनीला उघड करू नये असे वचन देते.
Contact Now